Installing a new stereo in your car might seem too complicated, but if you spend the time to follow the right steps, you can do it all by yourself. If you are looking to improve your listening experience inside your car, installing a new car stereo in your Buick might be the perfect solution. Before you start installing your new stereo system, be sure to check and ensure that the new system you purchase is the right size and type for your vehicle. Check with an electronics store to get all the parts you need.
Steps for Installing a New Car Stereo 
Step 1: Turn off your car and disconnect the negative cable from your car battery. You want to make sure that you won’t short circuit the stereo system as you are working with it.
Step 2: Remove the trim surrounding the stereo by unscrewing any places it is connected and gently pulling it free from the console. Make sure to bring any additional components along with it, so that you have room to see the stereo. However, take a picture of how any wired components are connected for later reference in reconnecting.
Read More: My Car Has Blue Exhaust Smoke?
Step 4: Match up the wires to the new stereo and put together the mounting kit. Follow the instructions with the new stereo to ensure you have everything you need to mount it. Then start by plugging in the power source.
Follow the power source with any other wires you need to connect. Use the picture you took before to match things up with the new stereo. If necessary, ground the (usually black) wire by attaching it to a part of the metal frame. If your cords are wrapped in a harness, then the new system should be grounded already.
Check This Out: Tips for Faster Warming of Your Car
Step 5: Carefully slide the new stereo into place and start the car and test the stereo to ensure that the installation was done correctly.
Step 6: Replace the exterior cover and other components. Be sure not to force anything into place, and make sure to replace all the screws to secure all the parts. Start the car and test to make sure all the pieces affected by the installation are working.
Step 7: Congratulate yourself on installing your new stereo!
